水滴型宽式粉碎机

1. 水滴形粉碎过程，破坏粉碎室环流，比普通粉碎机提高

     效率45%以上，是普通型粉碎机的改进型和替代型

2. 0.8、1mm的筛网可满负荷工作，根据选配不同型号高

    压风机不堵机，在不换筛的前提下可以实现粗、细粉碎

    （调整锤筛间隙）

3. 锤片数量增加2-3倍， 能实现一机多用，简化工艺布置，

    节省投资成本

4. 为多纤维、高水分、高油性原料的细粉碎进行优化设计， 

    尤其适用于鱼干、棉柏、玉米棒、虾壳、豆皮、中药材和

    含水量高的玉米等（ 17-24%)

5. 粉碎机体振动时，粒度更均匀，可使用1.2mm以下及大孔

    径筛网同生产粗、中、细、超 微粉料，效率更高，无糊筛现象

6. 广泛应用于饲料加工、油脂、化工、食品加工、酿造等行业

    颗粒、粉状物料的粉碎

7. 配备先进技术的变频叶轮式或磁带式喂料器，工作效率高，

    更可靠

8. 粉碎室采用w二次粉碎结构，产量提高15%以上

9. 充分优化的锤片排列，可调节的锤筛间隙，轻松实现普通

    粉碎和细粉碎的转换

10.不同功率大小机型分别选配NSK，或SKF等进口高品质轴承

     高效且使用寿命更长

1.Improve efficiency 45% than normal hammer mill, it is the modified and 

   alternative machine for the normal hammer mill.

2. The 0.8 and 1 mm screen can fult- load work and without block up, can 

    reach coarse and fine grinding under the premise of notchange screen.

3. The quantity of hammer increase 2-3 times and can Multi-purpose. to 

    simplify the process arrangement, saves the cost of investment

4. Optimization design for multi-fiber， high moisture, high oil material fine 

   grinding, especially for dried fish, cottonseed meal, corncob, shrimp shell, 

   bean leather，Chinese medicinal materials and high moisture corn(17-24%)

5. When the grinding body working, the feed pellet are more uniform, can 

   use Ø1.2mm below and large aperture screen productionof coarse，fine. 

   micro-fine, high efficiency, no paste screen phenomenon.

6. Widely used in feed processing，oil, chemical industry, food processing, 

   brewing industry particle and power material grinding.

7. Equipped with advanced technology frequency conversion impeller 

  t ype and magnetism ribbon type feeder, work efficiency more reliable

8. Grinding chamber adopted  'w’ second grinding structure, increase 

  capacity 15%

9. The fully optimized arrangement of the hammer， adjustable interval 

   between hammer and screen can easily realize common

   grinding and fine grinding shift_

10. Adopt NSK bearing, long service life and high efficient

主要参数表：

水滴型粉碎机图：